Specifiche
Hardware
| OS | Linux (kernel 2.6.15) |
| CPU | Sigma SMP8634 (300MHz MIPS - 4KEc core - decoding audio/video in hardware) |
| RAM | 4x Samsung K4H561638H-UC/LA2 (DDR2, 128Mb totali, circa 114Mb accessibili) |
| Flash | Spansion S29GL512N (64Mb) |
| Ethernet | Controller Realtek RTL8201CP (10/100, autosensing) |
| USB | 2x USB 2.0 |
| Video out | 2x SCART (1 pass-through), 1x S-Video, 1x Videocomposito, 1x HDMI |
| Audio out | 1x S/PDIF, 2x RCA (stereo) |
| Tuner | DVB-T NXP TU1216L (include uscita coassiale). |
Altre periferiche:
- Modem per le funzioni MHP ( solo sul modello HY101).
- Modulo smart card con Philips TDA8024AT.
- Sensore IR per telecomando o tastiera senza fili.
Mappa della memoria
0xac000000 xenv standard (mtd1 0x020000) 0xac020000 xenv recovery (mtd2 0x020000) 0xac040000 empty 0xac120000 zboot (mtd3 0x020000) 0xac140000 yamon recovery (mtd4 0x040000) 0xac180000 empty (mtd5 0x100000) 0xac280000 yamon standard (mtd6 0x040000) 0xac2c0000 jffs2 config (mtd7 0x200000) 0xac4c0000 linux kernel (mtd8 0x200000) 0xac6c0000 cramfs (mtd9)
