====== Specifiche ======
===== Hardware =====

|**OS**       | Linux (kernel 2.6.15) | 
|**CPU**      | Sigma SMP8634 (300MHz MIPS - 4KEc core - decoding audio/video in hardware)|
|**RAM**      | 4x Samsung K4H561638H-UC/LA2 (DDR2, 128Mb totali, circa 114Mb accessibili)|
|**Flash**    | Spansion S29GL512N (64Mb)|
|**Ethernet** | Controller Realtek RTL8201CP (10/100, autosensing)|
|**USB**      | 2x USB 2.0|
|**Video out**| 2x SCART (1 pass-through), 1x S-Video, 1x Videocomposito, 1x HDMI|
|**Audio out**| 1x S/PDIF, 2x RCA (stereo)|
|**Tuner**    | DVB-T  NXP TU1216L (include uscita coassiale). |


**Altre periferiche**:
  * Modem per le funzioni MHP ( solo sul modello HY101).
  * Modulo smart card con Philips TDA8024AT.
  * Sensore IR per telecomando o tastiera senza fili.

===== Mappa della memoria =====

  0xac000000      xenv standard (mtd1 0x020000)
  0xac020000      xenv recovery (mtd2 0x020000)
  
  0xac040000      empty
  
  0xac120000      zboot (mtd3 0x020000)
  0xac140000      yamon recovery (mtd4 0x040000)
  0xac180000      empty (mtd5 0x100000)
  0xac280000      yamon standard (mtd6 0x040000)
  0xac2c0000      jffs2 config (mtd7 0x200000)
  0xac4c0000      linux kernel (mtd8 0x200000)
  0xac6c0000      cramfs (mtd9)